Tag Archives: technology

Snake robots! Slithering machines could aid search-and-rescue efforts

robot-snake

The Carnegie Mellon snake robot has finally mastered the art of slithering up a sandy slope. (Nico Zevallos and Chaohui Gong)

One snake’s ability to shimmy up slippery sand dunes could inspire new technologies for robots that could perform search and rescue missions, carry out inspections of hazardous wastes and even explore ancient pyramids.

A new study looked at the North American desert-dwelling sidewinder rattlesnake (Crotalus cerastes), a creature better known for its venomous bite than its graceful movements. But this snake can climb up sandy slopes without sliding back down to the bottom a feat that few snake species can accomplish.

Snakelike, or limbless, robots are intriguing to scientists for several reasons. First, their lack of legs, wheels or tracks means they don’t often get stuck in ruts or held up by bumps in their path. They could also be used to access areas that other bots can’t get to, or to explore places that aren’t safe for humans. [Biomimicry: 7 Clever Technologies Inspired by Nature]

The sidewinder shimmy

To get a closer look at their live study subjects, the researchers headed to Zoo Atlanta, where they were able to examine six sidewinder rattlesnakes. They tested the snakes on a specially designed inclined table covered with loosely packed sand.

Fifty-four trials were conducted, with each of the six snakes slithering up the sandy table nine times, three times each at varying degrees of steepness. As the snakes worked their way up the makeshift sand dune, high-speed cameras tracked their movements, taking note of exactly where their bodies came into contact with the sand as they moved upward.

The researchers found that sidewinder snakes live up to their name. The slithery creatures moved up the sandy incline in a sideways motion, with their heads pointing toward the top of the incline and the rest of their bodies moving horizontally up the slope. The researchers then looked more carefully at how sidewinders carry out these complex movements.

“The snakes tended to increase the amount of body in contact with the surface at any instant in time when they were sidewinding up the slope and the incline angle increased,” said Daniel Goldman, co-author of the study and an associate professor of biomechanics at the Georgia Institute of Technology in Atlanta. Specifically, the snakes doubled the amount of their bodies touching the sand when navigating the slope, he added.

And the parts of the snake’s body that were touching the sand during the ascent never slipped back down the slope because the creature applied the right amount of force in its movements, keeping the sand under it from sliding, Goldman told Live Science.

Snake robots

To put their newfound understanding of sidewinding to good use, Goldman and his colleagues got in touch with Howie Choset, a professor at The Robotics Institute at Carnegie Mellon University in Pittsburgh. Choset, who has been developing limbless robots for years, already developed a snakelike bot that performs well both in the lab and in real-life situations. However, his slithering machine has run into one particular problem during field tests.

“These guys have been making a robot sidewind for years over a wide diversity of substrates, but they had a lot of trouble on sandy slopes,” Goldman said.

To get the robot moving over sandy dunes, the researchers applied what they now know about the sidewinding rattlesnake’s patterns of movement. They programmed the robot so that more of its body would come into contact with the ground as it slides up the slope. They also applied what they had learned about force, which enables the robot to move its weight in such a way that it keeps moving upward over the sand without rolling back down the slope.

Now that Choset’s snake robot can move over tough terrain, it’ll be better equipped to handle the tasks that it was built to tackle.

“Since these robots have a narrow cross section and they’re relatively smooth, they can fit into places that people and machinery can’t otherwise access,” Choset told Live Science.

For example, these limbless robots could be used during search-and-rescue missions, since the slithery machines can crawl into a collapsed building and search for people trapped inside without disturbing the compromised structure. The snake bot could also be sent into containers that may hold dangerous substances, such as nuclear waste, to take samples and report back to hazmat specialists.

Choset also said these robotic sidewinding abilities could come in handy on archaeological sites. For instance, the robots could one day be used to explore the insides of pyramids or tombs, he said.

The research represents a key collaboration between biologists and roboticists, said Auke Ijspeert, head of the Biorobotics Laboratory at the Swiss Federal Institute of Technology at Lausanne (EPFL), who was not involved in the new study.

“I think its a very exciting project which managed to contribute to the two objectives of biorobotics,” Ijspeert told Live Science.

“On one hand, they took inspiration from biology to design better control methods for the robot,” Ijspeert said. “By looking at how sidewinding takes place in a snake, especially with slopes, they found out the strategy that the animal uses and, when they tested it on the robot, it could really improve the climbing capabilities of the robot.”

The researchers also achieved the second goal of biorobotics, he said, which is to use a robot as a scientific tool. By testing the different speeds at which the robotic snake could successfully climb up the sand, the researchers were able to pinpoint exactly how fast real snakes make their way up these slippery slopes.

“It’s a nice example of how robots can help in biology and how biology can help in robotics.”

The study was published online Oct. 9 in the journal Science.

Leave a comment

Filed under Humor and Observations

Soar through the air in this futuristic ‘invisible’ plane

  • Flying over any city has never been so cool.  Technicon Design Studio France

  • rteterte463463.jpg

    An exterior of the high- tech plane.Technicon Design Studio France

  • etertrete43463ppp.jpg

    Sunny skies all around.Technicon Design Studio France

  • tertert64pppp6.jpg

    The exterior cameras project images on the screens inside the cabin.Technicon Design Studio France

Who doesn’t a love a great view when soaring at 35,000 feet?

A new private plane design brings world class views to every passenger—without any windows.

Technicon Design’s Paris based team designed the jet to display to 360-degree views that are simulated on internal screens from external cameras that capture the surrounding environment in real time, according to the Daily Mail.

The images displayed in the interior cabin—including the walls and even the ceiling—give passengers the feeling of flying through the air in an invisible vessel.

For business minded clientele, the screens can also be used for video conferences. Or if you’re in the mood for a some entertainment, kick back and relax with a state of the art in flight movie. For claustrophobic passengers, the screens can also be used to project relaxing landscapes like a tropical beach.

Technicon Design created the design for a National Business Aviation Association and has since won an award at the International Yacht & Aviation Awards in the exterior design category.

“I challenged the team to break out of conventional thinking with regards to a business jet exterior and interior,” Gareth Davies, design director at Technicon Design’s studio near Paris, told the Daily Mail.

“We quickly settled on the controversial yet interesting idea of removing the windows from the cabin and using existing or very near future technology to display the exterior environment on flexible screens.”

A transparent plane might be a nightmare for some fearful travelers but if the design takes off, it will definitely one of the coolest ways to travel.

Take a look at the plane in action.

1 Comment

Filed under Humor and Observations

Space station shipment launched from Virginia

Space station shipment launched from Virginia

Orbital Sciences Corp. launched its Cygnus capsule from the Virginia coast, its third space station delivery for NASA.

Daylight and clouds limited visibility, but observers from North Carolina to New Jersey still had a shot at seeing the rising Antares rocket. It resembled a bright light in the early afternoon sky.
untitled (5)

Its destination, the space station, was soaring 260 miles above Australia when the Cygnus took flight. The unmanned capsule should arrive there Wednesday.

This newest Cygnus contains more than 3,000 pounds of supplies, much of it food. Also on board: mini-satellites, science samples, equipment and experimental exercise clothes. NASA said the new type of clothing is resistant to bacteria and odor buildup. So the astronauts won’t smell as much during their two hours of daily workout in orbit and they’ll require fewer clothing changes.

NASA is paying for the delivery service. The space agency hired two companies — the Virginia-based Orbital Sciences and California’s SpaceX — to keep the space station well stocked once the shuttle program ended. The international partners also make shipments; the European Space Agency, for example, will launch its supply ship in 1 1/2 weeks from French Guiana.

This particular Cygnus delivery was delayed a few months by various problems, including additional engine inspections and, most recently, bad weather at the Wallops Island launch site.

untitled (6)

The Cygnus will remain at the space station for about a month. It will be filled with trash and cut loose for a fiery re-entry. Unlike the SpaceX Dragon capsule, the Cygnus is not built to return safely to Earth.

Saturday, meanwhile, marked the 5,000th day of continuous human habitation at the 260-mile-high outpost. Six men currently are on board, representing the United States, Russia and Germany.

“Humans are explorers!” German astronaut Alexander Gerst said via Twitter.

Leave a comment

Filed under Humor and Observations

Shapeshifting Technology Within Grasp

Shapeshifting isn’t just for sci-fi movies; new shapeshifting technology can change video chats of the future.

A research group out of MIT has created a way to allow inanimate objects to respond to human touch. Internet users may soon use this technology to interact with each other or play with objects virtually.

MIT research assistant Daniel Leithinger says shapeshifting can take your smart device to the next dimension. “Right now, if you think about it, we are just poking at glass surfaces, and then we have these rich graphics underneath. Wouldn’t it be more engaging if we could actually touch information, reach out to other people and have a much richer sensory experience?”

The technology uses motorized plastic pins to respond to your movement. A group of pins are attached to a structure, each with an individualized motor. A motion sensor camera measures your movements and tells the pins how to respond. Fellow researcher Philipp Schoessler explains the technology: “Each element is like a pixel on a screen and if you have a lot of pixels, you can get the illusion of forms of shapes.”

Tangible media, like shapeshifting, can allow you to interact with other users, even shake hands virtually. Leithinger says it can also be used to develop 3D models. “Originally we started out developing shape displays. And the idea of a shape display is, they are kind of like your average multi-touch display like your computer or phone. But rather than just sensing touch and outputting graphics it can also output shapes and you can deform those shapes.”

It can even be used to transform your furniture. Researchers hope to incorporate shapeshifting into furniture that can mold to your body, identify pressure points, or stimulate movement to keep you alert on the job. “I think of it more as helping you, not forcing you to change yourself. Going from a seated to a standing position, that’s definitely something it can do, help you form healthy habits,” says Leithinger.

The possibilities move beyond furniture and video chats. The technology can be used in other fields like landscaping and architecture.

The tech is still in its developmental stages but Leithinger says it may soon become a part of daily life. “We really feel we can go much more interesting…We can have the richness of real objects, of using our hands and our bodies, when interacting with computers. But we think that this shapeshifting technology will be necessary in order for us to do so.”

Hillary Vaughn is part of the Junior Reporter program at Fox News. Get more information on the program here and follow them on Twitter: @FNCJrReporters

Leave a comment

Filed under Humor and Observations

Musk: SpaceX could land humans on Mars in 10 to 12 years

Musk: SpaceX could land humans on Mars in 10 to 12 years

SpaceX founder Elon Musk thinks his private spaceflight company will have the capability to land humans on Mars within 12 years, assuming the availability of funding for the historic mission. Also, once SpaceX starts making steps toward this goal, the company could be floated on the stock market to boost investment for the red planet adventure.

Musk, who also founded the electric car manufacturer Tesla, has always made his interplanetary intentions known, but this recent announcement is a reminder about how far the company has come and how far it is looking into the future.

 During the CNBC interview, Musk said: “I’m hopeful that the first people could be taken to Mars in 10 to 12 years, I think it’s certainly possible for that to occur. But the thing that matters long term is to have a self-sustaining city on Mars, to make life multiplanetary.”

Musk also highlighted NASA’s role in SpaceX’s success, pointing out that without the US space agency’s pioneering work that SpaceX wouldn’t be where it is today. NASA provided funding to help develop SpaceX’s Falcon rocket series and Dragon space capsule, eventually awarding the company a $1.6 billion contract to help resupply the International Space Station.

SpaceX is now competing for the next round of NASA contracts that will be awarded to a private US spaceflight company for commercial crew launches to the space station. Musk unveiled the crewed version of the Dragon capsule — dubbed the Dragon “V2″ (version 2) — at the company’s headquarters in Hawthorn, Calif., last month.

The Dragon V2 will be considered in a 3-way competition to acquire NASA contracts to fly astronauts to the space station (and beyond), ending the US dependence on the Russian Soyuz launch vehicle to get astronauts into space after the Space Shuttle fleet was retired in 2011. Aerospace giant Boeing and spaceflight company Sierra Nevada also have potential “space taxis” in the running, but NASA cannot fund them all.

Should SpaceX not win the commercial crew contract, however, Musk is still confident that his ultimate Mars dream can be fulfilled.

“It’s possible that we may not win the commercial crew contract. … We’ll do our best to continue on our own, with our own money,” he said. “We would not be where we are today without the help of NASA.”

SpaceX is hoping to see the maiden flight of the powerful Falcon Heavy rocket within the next year, a booster that could launch heavy components for a Mars mission into space.

A potential route to funding a Mars mission could come if SpaceX went public and floated on the stock market. But with investors comes pressure for the company to be constantly growing and being profitable, momentum that can be difficult to maintain over a multi-year effort toward the one Mars goal.

“We need to get where things a steady and predictable,” Musk said. “Maybe we’re close to developing the Mars vehicle, or ideally we’ve flown it a few times, then I think going public would make more sense.”

While commenting on Tesla’s pioneering work into driving down the cost of electric cars, Musk joked that a mission to Mars may be an easier task than driving down the cost of electric car batteries to less than $5000. He was, however, optimistic that Tesla could start producing a “compelling” mass-market electric car within the next 3 years.

1 Comment

Filed under Humor and Observations

Thought-controlled planes are in our future

Thought-controlled planes are in our future

Why pilot a plane with your hands and feet when you can do it with your brain? Thought-controlled flight could be arriving soon, according to the EU-funded “BrainFlight” project.

A team of scientists from the Institute for Flight System Dynamics and the Berlin Institute of Technology says it has translated brain impulses into control commands, enabling pilots in a plane simulator to achieve a range of remarkably precise maneuvers without touching the controls or pedals.

Wearing a cap with lots of cables attached, pilots in the simulator were able to land a plane simply by looking at the screen and moving the control stick with their thoughts, correcting the plane’s position repeatedly until it landed.

To achieve the breakthrough, the researchers connected electroencephalography (EEG) electrodes to a cap to measure the pilot’s brain waves. An algorithm created by Berlin Institute of Technology scientists enabled a program to decipher the brain waves and convert them into commands fed into the plane’s control system.

Once it’s perfected, brain-controlled flight could reduce pilot workload and increase safety. Freeing up pilots’ hands would give them freedom of movement to manage other manual tasks in the cockpit.

The German team conducted its experiment using seven test subjects with a range of flight experience, including one who had no experience whatsoever.

The team reported that all seven, flying the plane only with their thoughts, managed to achieve accuracy that would meet some flying license requirements. Astonishingly, even the participants with little or no prior training succeeded in landing the planes.

One participant was able to follow eight out of 10 target headings with only an incredibly small 10-degree deviation. Another was able to land within only a few meters of the runway’s center line.

Some even managed their approach in poor visibility conditions.

Imagine what trained military pilots might be able to do with this technology.

In 2010, British researchers revealed that fighter pilots, despite being more sensitive to irrelevant and distracting information, have significantly greater accuracy on cognitive tasks. When scientists looked at MRI scans, they found that pilots have a white matter microstructure in the right hemisphere of their brains that is different from non-pilots’.

The German team’s achievement isn’t the first of its kind.

Last year, a team from the University of Minnesota announced that it had flown a model helicopter through an obstacle course using thought alone. As in the German system, electrodes were attached to the pilot’s scalp, and his brain waves were used to guide the aircraft.

Creating a mental image altered brain activity in the motor cortex, which was recorded by the electrodes. A computer program deciphered the signals and translated the pilot’s intent.

To move the helicopter in a particular direction, a user imagined clenching his or her hands. To go left, for example, the pilot pictured clenching the left hand. To go up, he clenched both hands.

Ultimately, the developers of the mind-controlled helicopter hope to adapt their technology to direct artificial limbs and other medical devices.

In another example, in 2010, a team at the University of Illinois at Urbana-Champaign announced it had flown an unmanned aircraft at a fixed altitude with the ability to adjust headings in response to the pilot’s thoughts.

What’s next?
The TU München scientists are now researching how control systems and flight dynamics must be altered to accommodate brain control.

For example, pilots flying with their hands feel resistance in steering. But this sort of feedback doesn’t happen in brain-controlled flying.

The next step is to find ways to provide this sort of critical feedback without physical contact.

Leave a comment

Filed under Humor and Observations

How does a $50 3D-printed hand match up to $42G prosthetic?

How does a $50 3D-printed hand match up to $42G prosthetic?

Published April 23, 2014·
FoxNews.com

Jose Delgado, Jr., 53, was born without most of his left hand and has been using prosthetic devices for decades. His current device, a myoelectric prosthesis, is valued at around $42,000.

Due to the high cost of prosthetics, groups like e-NABLE, comprised of a global community of volunteers, have been formed with the goal of providing free 3D-printed devices and parts for people in need.

Jeremy Simon, an e-NABLE volunteer and founder of 3D Universe, had an idea: make a 3D-printed mechanical hand using $50 worth of materials and see how it compares to the $42,000 prosthetic. The results were shocking.

“Certainly we’re not making an apples to apples comparison — these are entirely different kinds of devices — but the comparison I was trying to draw with Jose was strictly in terms of day-to-day functionality what’s more useful,” Simon told FoxNews.com. “It turned out [the 3D-printed] one was.”

Delgado Jr., who tested the device, told Simon the grip of the 3D-printed hand made it more functional in many cases than the more expensive prosthetic.

“It’s useful for carrying boxes,” Delgado Jr. said. “These are more grip and won’t let go of much.”

Simon found the design for the 3D-printed via e-NABLE.

“We’re talking about 3D designers, university professors, occupational therapists, medical professionals, all sorts of people are in this community and they all give completely freely of their time and efforts,” Simon said.

Simon hopes the 3D printing movement will continue to grow, and hopes philanthropic efforts like those of e-NABLE will thrive.

“As long as there’s still people willing to do this kind of work, the technology is going to continue to get more accessible and more affordable,” Simon said.

Leave a comment

Filed under Humor and Observations

Pocket Sized Printer Moves Across Page

Pocket-Sized Wonder-Printer Would Work Its Own Way Across a Page

O

Pocket-Sized Wonder-Printer Would Work Its Own Way Across a Page

With what has to be one of the most ambitious Kickstarter projects to come along in a while, the folks behind this Mini Mobile Robotic Printer want to revolutionize the mobile office. Because of instead of carrying a page-wide device that has to pull paper through it, this little marvel will instead print directly on a piece of paper while it rolls around on top of it.

The printer’s arrow-shaped design makes it easy to properly position on a page—you just need to make sure it starts in the upper left-hand corner of a piece of paper. It works on any sized piece of paper, but with a standard letter-sized sheet the current prototype can fill a page in just under a minute.

Pocket-Sized Wonder-Printer Would Work Its Own Way Across a PageSExpand

Its built-in ink cartridge is promised to churn though around 1,000 pages before needing to be replaced, but that’s assuming every page you print isn’t solid black. And at the moment the print quality is a less-than-amazing 96×192 dpi, but it’s claimed that that will be improved if and when the Mini Mobile Robotic Printer becomes a reality.

Its creators are currently trying to raise $400,000 on Kickstarter to make it a reality, but there are certainly some very steep roadblocks to making it reliable and accurate enough to be worth carrying around. You can reserve one for yourself with a donation of $180, but you’ll have to be patient since delivery isn’t expected until early January 2015 at best.

Admittedly, it’s a little hard to get excited over a printer, especially one that seems so implausible. But if this thing ever does see the light of day, it will certainly be a must-have addition to any road warrior’s kit. And if you only find yourself in need of a printer a few times a week, it has the potential to replace that giant gray box on your desk. [Kickstarter via Pocket-lint]

2 Comments

Filed under Humor and Observations

10 Incredible Cutting-Edge Technologies In Development

10 Incredible Cutting-Edge Technologies In Development

Mike Floorwalker August 29, 2013

Don’t give up on flying cars or hoverboards just yet! As technology marches relentlessly on, everything goes into development sooner or later—as demonstrated by the existence of these things, which we’ll almost certainly see within our lifetimes.

10 Artificial Gills

Freediving - Guillaume Nery Prepares for World Record Attempt

Inventors have long sought an underwater breathing apparatus that doesn’t store oxygen, but extracts it from the water the way gills do. Israeli inventor Alon Bodner has come close.

The device, aptly named LikeAFish, works by using a centrifuge to lower the pressure of water within an airtight chamber. Since only a little oxygen is contained in water, the device must move about 190 liters (50 gallons) per minute in order for the average person to breathe comfortably. Despite this, the only real barrier to implementation is size and weight, but it’s close enough that the device has been under consideration for military use for several years now.

Such a system would obviously allow for longer “bottom time” without the need for refilling oxygen and would decrease the amount of nitrogen the diver is exposed to. According to Bodner’s website, the company spent 2012 “quietly designing a prototype to be installed on board a naval submarine,” so they may be very close to solving the size and weight issues of previous prototypes.

9 Agricultural Robots

Robot Farm

Agricultural robotics are, somewhat surprisingly, still in their infancy. While unemployment seems to be leveling off, there is still talk of a possible general labor shortage in the near future—particularly in agriculture. Many companies worldwide are attempting to bring various types of robot farmhands to market, but in robotics (where government and academic projects still lead the way) it tends to take longer than in some other, more commercial industries for such projects to obtain funding, produce a product, and prove its viability.

But the technology is coming along, and it’s easy to imagine it implemented on a wide-scale basis before too long. One Boston company that was able to raise nearly $8 billion in private funds in 2011 has developed a robot that it claims could perform 40 percent of the manual labor currently performed on farms. A Japanese research company has developed a robot that performs stereo imaging of strawberries to determine their ripeness before picking them, and MIT has a cherry tomato garden that is managed by a small crew of robots equipped with vision sensors. Of course, the main advantage to robot farm workers is the fact that they can work around the clock and never get tired.

8 Sunscreen Pills

Sunburn

An effective sunscreen that can be administered orally has been sought after for some time now. One doctor claims that a fern extract, containing the compound polypodium leucotomos, can act as such. He cites a human study showing less sun damage to the skin of those who were administered the active ingredient (though he did have to admit that there were only 12 people involved).

Also promising is a study at King’s College in London, which has determined a method by which coral protects itself from UV rays through its relationship with a symbiotic algae that lives within it. The algae produces a chemical compound which is converted by the coral into its own UV-blocking sunscreen, benefiting not only the coral and the algae but also the fish that feed on the coral. This transference has led scientists to believe that if the compound can be isolated, it could potentially be modified into a human oral sunscreen that would protect both the skin and the eyes. Said Dr. Paul Long, head of the three-year project, “There would have to be a lot of toxicology tests done first but I imagine a sunscreen tablet might be developed in five years or so. Nothing like it exists at the moment.”

7 Paper-Thin, Flexible Computers and Phones

Flexible computer pic WEB

In early 2013, consumer electronics shows debuted a prototype by European firm Plastic Logic of a product called the Papertab. That would be a portmanteau of “paper” and “tablet” and it is pretty much what it sounds like: a fully functional, touch screen tablet computer that is not only as thin as a sheet of paper, but as flexible as one too, and possesses the same reflective qualities. The company envisions such machines being ubiquitous within five to 10 years, as they could be inexpensive and interactive. A consumer could have several lying around, multi-tasking with different media all in service of one project.

A joint project between two American and Canadian universities has been creatively dubbed the Paperphone. Queens University director Dr. Roel Vertegaal has largely the same vision of the project. “This is the future,” he says. “Everything is going to look and feel like this within five years.” The machine is the size of a regular smartphone, with a 9.4-centimeter (3.7 in) display, but again, paper-thin and flexible. Users can give the phone commands by using “bend gestures.” It consumes no power when not in use and is considerably harder to damage than an ordinary phone.

6 Tooth Regeneration

TEETH

Regeneration of body parts in humans seems permanently consigned to the realm of science fiction, even though many species of animals are able to completely regrow lost parts. It’s long been known that alligators are able to regrow lost teeth, for example, but it was assumed to be a cyclical process, like snakes shedding their skin periodically. Scientists have recently discovered that this is not the case: An alligator’s tooth will grow back automatically to replace a lost one. This is quite significant because the structure of alligators’ teeth is pretty similar to ours.

The problem has been that the inner areas of teeth contain living tissue known as “pulp” that doesn’t grow back. But the solution may have been found in stem cells: Scientists in multiple countries are trying to figure out how to get them to produce the correct tissues and structure for the given situation on demand. A University of Utah study in November 2012 confirmed that this could be done in a lab.  Perfection of this technology could result in the potential end of tooth decay, gum disease, fillings, and root canals.

5 Holographic TV

3d-holographic-projection-car

While Ultra High Definition TV is on the way, there are really only so many pixels you can cram into a flat display—most existing models are 214-centimeter (84 in) monsters for that very reason. But the next generation of TVs, if you can call them that, won’t have screens so much as they’ll have a viewing area. As seen above, it could be a desktop display, or it could be an entire room—but holographic displays are definitely in the works.

Researchers at MIT, who are apparently good at the cutting-edge technology thing (hence the “T”), have created a chip that can support a holographic display of 50 gigapixels per second—enough to simulate real world objects, as reported in the journal Nature. Such amazing technology will have to wait to come to marketplace, though, until costs can be driven down—right? Well, says Michael Bove, head of MIT’s Object-Based Media group: “The technology itself is one that’s easy and inexpensive and, as far as we are aware and Nature is aware, has never been applied to displays before.” He foresees holographic displays on the market within 10 years—at the same cost as today’s regular, flat TVs. Another company, Provision, has built an inexpensive projector that displays a 45-centimeter (18 in) image. As of this writing, they’re working on ramping that up to a two-meter (six-foot) image, displayed by a unit the size of a toaster.

4 Real-Time Google Earth

Eye

At RAL Space in Oxford, scientists are building two video cameras quite unlike any other. Meter-long tubes packed with electronics and mirrors, these cameras are to be mounted to the outside of the International Space Station. But their purpose isn’t to capture images of space—they’ll be pointed toward the Earth. And while the resolution won’t be great (roughly a meter per pixel) it will be a real-time, streaming, live video of the entire planet.

Meanwhile, some Georgia Tech researchers are taking a slightly different approach toward the same ends. They take footage from the many live video feeds around the world and use it to layer complex animations on top of Google Earth, sometimes piecing together multiple camera angles to extrapolate the desired information. While currently focusing on people and cars, they’d like to add animals and weather conditions soon.

3 Wireless Electricity

ZAP ZAP ZAP

The notion of wireless electric power has been around far longer than one might think: Nikola Tesla might have perfected the technology a century ago if he had not been poor, unlucky, and kind of crazy. Many today are unaware that, even though it has obviously yet to be deployed en masse, wireless power transfer actually exists.

Wireless device charging has been around for some time, and continues to improve. Companies like Witricity are at work developing electric “hubs” that can power your entire house. Their prototype is called “Prodigy” and is based on research done by physicist Marin Soljacic of MIT. It works by exploiting the fact that certain frequencies of electromagnetic waves facilitate ease of energy transfer, and two objects resonating with such a frequency can easily transfer electricity between them, even at some distance and even if the objects are metal. When perfected (which many see coming within the next decade), it could bring about an end to batteries as we know them.

2 Ultra–High Speed Tube Trains

;adfjlga;gf

Magnetic levitation, or Maglev, trains have been in development for quite some time. In Japan, a recent successful test run means that plans are underway to connect the whole country by 2045 with trains capable of reaching over 480 kph (300 mph). They accomplish this by removing the wheels—and thereby, contact and friction—from the equation. Maglev trains levitate above the track, suspended by an electromagnetic field. And while the Japanese model is impressive, one company in the small Colorado town of Longmont is upping the ante by eliminating another barrier to shattering speeds: namely, wind resistance.

To be fair, eliminating this factor doesn’t so much up the ante as it blows up the entire house containing the card table. Daryl Oster of ET3 says that his company’s concept, called the Evacuated Tube Transport, is the future of transportation, and it very well may be. Its track is contained within a sealed, pressurized vacuum tube, making the capsules conceivably capable of speeds up 6,500 kph (4,000 mph), all while subjecting the passenger to G-forces comparable to that of a leisurely ride on the highway and transporting them across the entire US in less than an hour. ET3 has built prototype capsules and, as of this writing, are searching for an appropriate stretch to build the first tube.

1 Sustainable Fusion Reactor

Fusion Reactor

Nuclear fission (the process by which nuclear power plants produce energy) is much easier to control than nuclear fusion (the process by which the sun burns, and nuclear weapons work). Small nuclear fusion reactors have been built, but a large-scale, sustainable fusion reactor has yet to be attempted—until now. A consortium of seven member bodies (the US, EU, Russia, China, Japan, South Korea, and India) has chosen a location in France to build the world’s first. And while even its champions concede it could be decades before it’s dispensing energy, nuclear fusion is cleaner and yields three to four times more power than fission.

The project is called ITER, for International Thermonuclear Experimental Reactor, and it is the second-largest cooperative international scientific endeavor (ranking behind only the Space Station). It will use a donut-shaped magnetic field to contain gases that will reach temperatures comparable to those at the core of the sun, in excess of 150 million degrees C (270 million F), and will produce 10 times more power than it consumes.

        Mike FloorwalkerMike Floorwalker’s actual name is Jason, and he lives in the Boulder, Colorado area with his wife Stacey. He enjoys loud rock music, cooking and making lists.

 

 

Leave a comment

Filed under Humor and Observations

Western Digital unveils 6TB, helium-filled hard drive

Western Digital unveils 6TB, helium-filled hard drive

Published November 04, 2013

FoxNews.com
  • Western Digital USC7K1000.jpg

    A stack of platters and the read / write arms that pull data off of them in an ordinary hard drive. New helium-filled models from Western Digital pack in more platters yet draw less power. (WESTERN DIGITAL)

  • Air HDD vs HeliumHDD.jpeg
    WESTERN DIGITAL
  • Air HDD vs Helium HDD.jpeg

    New helium-filled hard disk drives from Western Digital pack in more platters yet draw less power. (WESTERN DIGITAL)

Western Digital had a problem: ordinary air.

Modern hard drives store data on five metal platters that spin at up to 15,000 revolutions per minute, so fast in fact that drag from the tiny amount of air they whistle through is a problem. But at one-seventh the density of air, helium provides far less resistance for those spinning disks, letting the company pack in more disks that require less power and therefore cost less to operate.

The company on Monday unveiled a 6 terabyte hard disk called the Ultrastar He6 that packs seven platters of data filled goodness into the space usually filled by five. The company says these helium-filled hard disks are the future.

“Our mainstream helium platform will serve as the future building block for new products and technologies moving forward. This is a huge feat, and we are gratified by the support of our customers in the development of this platform,” said Brendan Collins, vice president of product marketing, for the company.

Netflix appears to agree.

“We serve billions of hours of streaming video per quarter to over 40 million subscribers,” said David Fullagar, director of content delivery architecture at Netflix. “The high storage density and lower power usage of the Ultrastar He6 hard drives allow us to continue with that goal, and create a great customer experience.”

The new drive consumes 23 percent less power when idle, and it runs quieter. (It weighs less too, of course — fully 50 grams less, the company said.) The drives are hermetically sealed to keep the helium in, something the company said was an engineering challenge.

1 Comment

Filed under Humor and Observations